2.3 - LIQUID ENDS MATERIALS
- DIAPHRAGM: PTFE
- PUMP HEAD: Polypropylene (PVC for 05-20), upon request: PVC, 316 Stainless Steel, PTFE. Stroke
Adjustment: PVC pump head
- NIPPLES: polypropylene
- FILTER: polypropylene
- INJECTION NIPPLE: polypropylene
- SUCTION HOSE: PVC - flexible
- DISCHARGE HOSE: polyethylene
- VALVES: “lip”type viton upon request available in EPDM (Dutral), NBR, Silycon.
- “Ball Check” VALVES upon request type in SS 316 and Glass PYREX. Available with Spring Return and
“KALRETZ”Valve.
- SEALS: viton upon request EPDM (Dutral), NBR, Silycon, PTFE only for ball checks valves
2.4 - DESCRIPTION OF THE TABLE (Fig. 3)
Column
1 - Pump type
2 - Metering pump max flow rate (l/h)
3 - Max working pressure (bar)
4 - Pulse/minute
5 - Injection volume per stroke (ml or cc)
6 - Piston stroke length (mm)
7 - Suction height (m)
8 - Standard power supply (Volts and Hz)
Other power supplies can be made upon request
9 - Power consumption (Watts)
10 - Absorbed current I (Ampere)
11 - Weight in kg
Fig. 3a
The diagrams of fig. 3a indicate max metering pump flow variation in relation to the working pressure in the
plant; the diagrams also include injection valve losses. I.V.P.
Due to production requirements the technical characteristics of our equipment at maximum ratings can vary
with a tolerance of 5% which must be taken into account when choosing the type of pump.
Comments to this Manuals